news

Carboxymethyl Starch(CMS) MSDS

Section 1Chemical Product Identification

1.Chemical Name : Carboxymethyl Starch,Drilling Starch

2.Molecular Formula: [C6H7O2(OH)2OCH2COONa]n

3.CAS NO.:9063-38-1

4.Structure Formula: R—CH2COONa: n is the degree of polymerization

5.Apperance: white and yellowish solid powder

6.Physicochemical property:biodegradable and anionic polymer material, which is moisture absorption, non-toxic, tasteless, and soluble in the water

 

Section 2 Company Information

Company Name: Shijiazhuang Taixu Biology Technology Co.,Ltd

Contact: Linda Ann

Ph: +86-18832123253 (WeChat/WhatsApp)

Tel: +86-0311-87826965  Fax: +86-311-87826965

Add: Room 2004,Gaozhu Building,NO. 210,Zhonghua North Street,Xinhua District,Shijiazhuang City,

Hebei Province,China

Email: superchem6s@taixubio-tech.com

Web: https://www.taixubio.com

 

Section 3 Hazardous Ingredients

Paints,Preservatives&Solvents                                 Alloys&Metallic Coatings

Pigments: N/A                                              Base Metal: N/A

Catalyst; N/A                                               Alloys:N/A

Vehicle                                                    Metallic Coatings:N/A

Solvents                                                   Filler Metal:N/A

Additives                                                  Others: N/A

Others

 

Section 4 Physical Data

Boiling Point (F) : N/A                                   Specific Gravity(H20=1): N/A

Vapor Pressure(mm HG): N/A                             Volatile by volume %: N/A

Vapor Density (air=1):N/A                                 Evaporation Rate: N/A

Solubility In Water: Forms Gel

 

Section 4 Fire and Explosion Hazards Data

Flash Point: 750 F/398 ℃                             Flammable Limits: N/A

Extinguishing Media: Water, Carbon Dioxide,Dry Chemical Powder,or Foam

Special Fire Fighting Procedures: Firefighter must wear SCBA & full protective clothing

Unusual Fire & Explosion Hazards: Can create a dust explosion,also emiits toxic fumes under fire conditions

 

Section 5 Health Hazard Data

Threshold Limit Value: N/A

Effects of Overexposure: Maybe harmful by inhalation,ingestion,or skin absorption. May cause eye and skin irritation

Emergency and First Aid Procedures: In case of contact immediately wash skin with soap and copious amount of water. EYES: Flush with copious amount of water for 15 min.Assure adequate flushing eyes by separating eye lids. If inhaled remove to fresh air. Remove and wash contaminated clothing promptly.

 

Section 6 Reactivity Data

Conditions to avoid: Very high temperatures, Exposure to humid air

Incompatibility( materials to avoid: Hazardous Polymerization

 

Section 7 Spills or Leak Procedures

Steps if products is released or spilled: Do not raise dust. Sweep up material and put into container for disposal. Wash and ventilate spill site.

Waste Disposal Methods: Dissolve or mix the material with a combustible solvent and burn is chemical incinerator equipped with after burner and scrubber.Obverse Federal,State and Local Laws.

 

Section 8 Special Protection Information

Respiratory Protection( Specify Type): NIOSH/MSHA approved respirator

Ventilation/ Local Exhaust: Required

Protective Gloves:Chemical resistant gloves

Eye protection: Safety goggles

Other protective equipment: Rubber Boots & Protective clothing

 

Section 9 Handling

Precautions: Wear protective clothing and gloves.

After handling wash thoroughly.Avoid contact with eyes,skin and clothing. Do not breath dust.

 

 

Section 10 Packing

 plastic woven bag or paper-plastic bag inner with P.P bag. 25KG/Bag

 

Section 11 Storage

Stored in the cool and dry ventilated places,,Keep away from moisture, sunlight, and rain. Prevent the leakage.

 

Section 12 Shipping

Do not shipping with the poisonous and corrosive products. Shipper as non-dangerous goods

 

Section 13 Impacting on Environment

It’s non-toxic and friendly to the environment

 

Section 14 Product Grade

It belongs to industrial grade. Not used for food products.

 

Section 15 Quality Standard

Q/X R004-1999

 

Section 16 Other information

Disclaimer:

The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding its’ correctness or accuracy. It is the user’s responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any specification, or for any given application, and buyers should seek to verify their requirements and product use.

 

Created: 2012-10-20

Updated:2020-10-10

Author: Shijiazhuang Taixu Biology Technology Co.,Ltd

 


Post time: Apr-25-2021